The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
STM8 applications use the USB full speed interface to communicate with STMicroelectronic\’s ST Visual Develop (STVD) or ST Visual Program (STVP) software.
STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.
• 5 V power supplied by a USB connector
• USB 2.0 full speed compatible interface
• USB standard A to mini B cable
• SWIM specific features
o 1.65 V to 5.5 V application voltage supported on SWIM interface
o SWIM low-speed and high-speed modes supported
o SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
o SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector
o SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
• JTAG specific features
o 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs
o JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
• Direct firmware update feature supported (DFU)
• Status LED which blinks during communication with the PC
• Operating temperature 0 to 50 °C
The LED labeled \’COM\’ on top of the ST-LINK/V2 shows the ST-LINK/V2 status (whatever the connection type). When the:
• LED is blinking RED: the first USB enumeration with the PC is taking place. If it keeps blinking RED, maybe the USB driver is NOT found.
• LED is RED: communication between ST-LINK/V2 and the PC is established (end of enumeration).
• LED is blinking GREEN/RED: data are being exchanged between the target and the PC.
• LED is GREEN: the last communication has been successful.
• LED is ORANGE: ST-LINK/V2 communication with the target has failed.
1. ST-LINK/V2 × 1
2. USB type A to Mini-B cable × 1
3. 20-pin JTAG/SWD flat ribbon × 1
4. 4-pin SWIM cable × 1
5. 4-pin SWIM custom connector cable × 1
- You can get the product from our office
- Home delivery is also available
- Delivery charge: Inside Dhaka-60 Taka, outside Dhaka-99 Taka
- We will send a custom made invoice with discount amount at the time of delivery.
- No existing offer will be applicable if customer avails this offer.
- Once the product is purchased,it will not be refundable
- Your booking does not always guarantee product delivery. Product delivery is entirely subjected to availability of stock
- Color of the products may slightly vary due to photography, lighting sources or your monitor setting/ PC resolution
- Product delivery may be interrupted or delayed due to natural disaster or in case of political unrest
- In case of delivery outside Dhaka, customers may have to collect certain products from the nearby courier service office.